Listing Kenwood Products

← Back to companies


[DISCONTINUED] The advanced Kenwood TM-D700A dual bander allows you to harness APRS, GPS and SSTV technologies to provide world class communications. The new-generation mobile transceiver features a built-in TNC to offer a wide range of data communications options including simple packet operation using the AX.25 protocol. But above all the TM-D700A is fully equipped to make the most of APRS - Automatic Packet/Position Reporting System. And it can employeed as part of Kenwood’s Skycommand System II+ when used with the TS-2000 series. You will also enjoy wideband receive 118 MHz to 1.3 GHz (cellular blocked). This radio includes the MC-53DM DTMF backlit hand mic. Terminal Interfaces: TNC AX.25 Level 2, Version 2, RS232C (9600/19200/38400/57600 bps), and GPS NMEA: RS-422 (4800 BPS), NMEA 96 RS232C (9600 BPS). Click here for specifications.


Kenwood TS-2000 HF, 2 meter, 70 CM, all mode


Discontinued 2 meter 70 CM mobile with the cool blue display

TH - D7a

Dual band, built in TNC handheld. Has been discontinued.


High frequency transceiver with coverage from 160 through 10 meters including the WARC bands; 100 watts final amplifier stage (40W AM). Requires 13.8 VDC at 20.5 amps (PS-50 included). I have almost every option made for the radio, including built-in antenna tuner; I am the original owner, with most of the original packing boxes. (Photo from Universal Radio)


5 Watt 144/220/440 MHz handheld transceiver/receiver (radio can be used with APRS, but it's not built in). Photo from Kenwood site. This rig is not for sale!


I see, I spupsoe that would have to be the case.


The Kenwood TM-732A dual band 2 meter, 440 MHz transceiver provides high performance communications with operating ease. It features dual receive including V+V and U+U, built-in DTSS and page functions, 50 memory channels and multi-scan functions. The high visibility front panel is detachable. Extended receive range is 118-174 MHz and 438-450 MHz. Power output is 50/10/5 watts on 2 meters and 35/10/5 watts on 440 MHz. 5.52 x 1.6 x 6.3 inches 2.4 Lbs. (140x40x160mm 1.1 kg). Requires 13.8 VDC at 11.5 amps. MC-45DM multifunction DTMF hand mic included.

Kenwood TS-520SE

The Kenwood TS-520SE is designed for SSB and CW modes in the 160 through 10 meter ham bands. It also features receive of WWV at 15 MHz. Power input is 200W PEP SSB and 160W DC CW. (This transceiver does not have general coverage receive). Note that the Transverter Control Connector on the rear panel of the earlier TS-520S is not on the TS-520SE. Requires 120 VAC 50/60 Hz 280 watts. 13.3 x 6 x 13.5 inches 35.2 lbs (333x153x335mm 16 kg). The photo of the TS-520SE above includes the optional SP-520, DG-5 and VFO-520S.


Kenwood 2 meter all mode transceiver

Trio R-599A

Ham-band short-wave receiver., 2m and 6 m converter optional


The Kenwood TR-9130 2 meter multimode transceiver provides 2 meter operation in FM, LSB, USB and CW modes. Power output may be selected at 5 watts (FM/CW) or 25 watts (FM/SSB/CW). Frequency coverage is 144-147.9999 MHz. Enhancements include: RF gain, RIT, S/RF meter, all-mode squelch and 5 memories. Both memory scan and band scan are supported. Requires 13.8VDC at 5.5 amps. 6.8 x 2.7 x 9.6 inches 5.3 lbs. Includes mobile mounting bracket, DC cord and up-down hand mic. (Shown above with optional MC-46 DTMF hand mic).

Kenwood TM-241A

The Kenwood TM-241A series provides great capability. There are 20 memory channels plus 1 call channel, and all can be used to store transmit and receive frequencies as well as repeater and signaling data. The TM-241A transmits on 2 meters with three output power levels: 5/10/50 watts. Extended receive allows reception from 118 to 174 MHz. New features include Dual Tone Squelch and pager functions. You also get auto-power off, built-in CTCSS encode, time-out timer, auto repeater offset and easy to read LCD.

TS 770E

Vintage 2m / 70 cm transceiver

Kenwood TH-79a

- 2 m/70 cm dual-band operation - Compact, light design - MOS FET power module - Dot-matrix LCD, guide function & menu system for easy operation - Dual receive on same band - Alphanumeric memory & alphanumeric message pager function - 80 non-volatile memory channels in E2PROM - ID memory & DTMF memory

Kenwood TS-50S

Kenwood HF Transceiver TS-50S


Tailor-made for DX'ing, the new TS-480HX HF transceiver raises the bar on portable performance. Despite its compact dimensions, it delivers an astonishing punch: 200W with a DC 13.8V supply. Yet its separate control panel is perfect for base station use. Sharing virtually all the same powerful features is the 100W TS-480SAT, except that it boasts a built-in antenna tuner. Whichever model you choose, you can be sure of enjoying the best of both worlds with first-rate communications at home and on the trail. • 200W output (50MHz: 100W) DC 13.8V in the TS-480HX • 100W model with built-in Antenna Tuner with the TS-480SAT • TX/RX 16-bit AF digital signal processing • Separate LCD control panel with speaker • Continuous RX: 500kHz (VFO: 30kHz) to 60MHz • TX covers all Amateur bands 1.8MHz to 50MHz • Other features include a TS-950 class quad-mixer • PSK31 compatibility • Packet cluster tune (with TM-D700A) • PC-based control • Optional IF filters Specifications Beat Cancel Yes Cross Band Repeat Yes With a TM-D700A or TM-D710A connected CTCSS Enc/Dec CW Auto Tune Yes DCS No Dual Band Receive No DX Packet Cluster Tune Yes With a TM-D700A or TM-D710A connected Memory Channels 100 Noise Reduction Yes Number of Bands 11 Output Power W PC Programmable No Radio Control Software Yes ARCP-480 Receiver Operating Mode FM/FM-W/FM-N AM/USB/LSB/CW Receiver Range .5-30Mhz 50-54Mhz VFO Continuous 30-60MHz RX Equalizer Yes Satellite Communications No SkyCommand Yes With a TM-D700A or TM-D710A connected TNC No Transmit Frequency Range 50-54MHz TX Equalizer Yes TX Monitor Yes Voice Synthesizer (Optional) Yes VGS-1 VoIP Yes Wide/Narrow FM Yes Automatic Antenna Tuner Yes

Kenwood TH-28E

2M transiver RX on air band & UHF

Kenwood TM-731A

Manufactured in the 1990's. Dual band, 2m/70cm mobile rig. Dual display, one of each band.

Kenwood TH-22AT

Single band 2m HT


Thank you so much for this arcilte, it saved me time!

Kenwood TM V71a crossband

146.565 X 445.700 Antenna Comet GP-9 @ 55'

Kenwood TM-621A

The Kenwood TM-721A dual band 2 meter, 440 MHz transceiver provides high performance communications with operating ease. It features dual watch receive, 30 memory channels and multi-scan function. Extended receive range is 138-174 MHz and 438-450 MHz. Power output is 45/5 watts on 2 meters and 35/5 watts on 440 MHz. 5.91 x 2 x 8.1 inches 4 Lbs. (150x50x205mm 1.8 kg). Requires 9.5 amps at 13.8 VDC. MC-48B multifunction DTMF hand mic included.


Type: Amateur VHF/UHF transceiver Frequency range: TX: 144-148 / 438-450 MHz RX: 118-174 / 300-520 / 800-999 MHz (after modification) Mode: TX: FM RX: AM/FM RF Power output: Hi: 50/35 W Mid: 10/10 W Lo: 5/5 W Sensitivity: 0.16 uV (12 dB SINAD) Selectivity: 12 KHz (-6 dB), 28 KHz (-60 dB) Image rejection: N/A Voltage: 13.8 VDC +/- 15% Current drain: RX: Max 1 A TX: Max 11 A Impedance: 50 ohms, N-type Dimensions (W*H*D): 140*40*189 mm Weight: 1.2 Kg Manufactured: 1998-199x Other: 180 memories with alpha tags. CTCSS/PL. 1K2/9K6 bd packet ready


DvAPWf , [url=]lzdzrlczrokm[/url], [link=]jdkfeqggawss[/link],

Kenwood TS 700G

2m allmode

Kenwood TM-741

Dualband mobile


This radio is no longer in production - but its a great little workhorse. You can still download the owners manual at the Kenwood USA website (see product URL) as well as service bulletins.

Kenwood TS-480SAT

TX covers all Amateur bands 1.8MHz to 50MHz

Kenwood TS-570S

With a half century of engineering and design experience to draw upon, Kenwood is changing the future of HF communications technology. High quality TX-RX audio reproduction with extremely effective DSP interference reduction delivers pleasing performance to your ear and over the air. A large, easy to read LCD display and built-in on screen operator guidance system for simple operation. Features like a 10-key direct frequency entry with new "soft-touch" keys, auto-antenna tuner, 100 to 5 watt for QRP operation, variable scanning speed, built-in CW keyer, ANT1-ANT2 ports, IF shift control, RS-232C com-port, 100 memory channels, CW reverse, optional VS-3 voice synthesizer and DRU-3A digital recording unit makes the TS-570D or TS-570S the radio for you.

Kenwood TS-930S

The Kenwood TS-930S is a superlative, high performance, all solid-state, HF transceiver capable of operation in SSB, CW, FSK and AM modes. Coverage includes the WARC bands. The all solid-state 28 volt final amplifier runs 250 watts PEP input on USB, LSB, CW and FSK and 80 watts on AM mode. Despite a multitued of features, the controls are very ergonomic and easy to use. Operates from 120 VAC


The Kenwood TR-751A 2 meter multimode transceiver is packed with the most often needed features including: auto-mode selection, dual digital VFOs, 10 memories (plus COM channel), all mode squelch, scanning, noise blanker, RIT and large LCD. Power output may be selected at 25 or 5 watts. This radio requires 6 amps at 13.8 VDC. 7.1 x 2.4 x 7.7 inches 4.7 lbs.


The Kenwood TS-430S is designed for SSB, CW, AM and FM (optional) modes. Coverage is 160 through 10 meters including the WARC bands. All solid-state technology is inputed rated at 250 PEP on SSB, 200W DC on CW, 120W FM (optional) and 60W AM. General coverage receive from 150 kHz to 30 MHz is featured


Following on the success of the TS-430S, the Kenwood TS-440S was designed for superior performance in the the SSB, CW, AM, FM and AFSK modes. Coverage is 160 through 10 meters including the WARC bands with 100 watts final amplifier stage (40W AM). Requires 13.8 VDC at 20.5 amps. MC-43S hand mic included. The Kenwood TS-440SAT has the AT-440 antenna tuner built-in.


Kenwood TS-120S is designed for SSB and CW modes in the 80 through 10 meter ham bands plus WWV 15 MHz receive. All solid-state technology is input rated at 200 PEP input on SSB, 160W DC on CW (160 and 140W on 10 m). The TS-120S features a 100 Hz digital display with analog subdial. (This transceiver does not have general coverage receive).


The Kenwood TS-130S follows in the tradition of the successful TS-120S. It is designed for SSB and CW modes in the 80 through 10 meter ham bands, and additionally includes the 30, 17 and 12 meter WARC bands. Other enhancements over the TS-120S include a Wide-Narrow bandwidth switch and speech processor. Plus the TS-130 series is compatible with the optional DFC-230 Digital Frequency Controller. All solid-state technology is input rated at 200 PEP on SSB, 160W DC on CW. The TS-130S features a 100 Hz digital display with analog subdial. (This transceiver does not have general coverage receive). Requires 13.8 VDC at 19 amps. 9.6 x 3.8 x 11.7 inches 12.3 lbs (241x94x293 mm 5.6 kg). The Kenwood TS-130V is a QRP version providing 25W PEP SSB, 20W CW. Requires 13.8 VDC at 4 amps.

RZ-1 Wide-Band Receiver

Kenwood RZ-1 tunes from 500 kHz to 905 MHz. Modes of reception are AM, FM and FM-W with tuning steps at 5, 12.5, 20 and 25 kHz. This incredibly wide frequency coverage includes almost everything. Enjoy AM broadcast band and complete shortwave coverage as well as VHF and UHF public service bands. It can even pick up TV broadcast audio. One hundred memories are available with 7 character alpha-tagging to label the stations you have stored. The numeric keys let you recall memories or directly enter the desired frequency. VFO and memory scanning are both supported. There is even a NTSC video output jack for TV video reception with an external monitor (not supplied). Other output jacks include: Left and Right Line Output and external speaker. Two antenna jacks are featured (Motorola and SO-239). The RZ-1 requires 13.8 VDC at 1 Amp.


Kenwood TM-2530/50/70A transceivers meet the needs of the demanding 2 meter operator. A wide range of innovative features have been incorporated into the basic design including: large, easy-to-read LCD, keypad entry, 23 multifunction memories, high/low power selection and sophisticated scanning. The "25-series" offers three power output versions: TM-2530A 25 watts, TM-2550 45 watts and TM-2570 70 watts (low power is 5 watts on all 3 versions). The optional VS-1 voice synthesizer announces frequency, memory channel, digital code, tone frequency and telephone number. The TM-2530A is 7.1 x 2.4 x 7.7 inches 4 lbs (180x60x195 1.8 kg) and requires 6.5 amps. The TM-2550A draws 9.5 amps and the TM-2570A draws 16 amps. The Kenwood TM-3530A is similar to the TM-2530A but transmits 25 or 5 watts on 220 MHz instead of 2 meters.


3 band mobile radio


2W 12 channel FM transceiver.


70cm SSB/FM/CW multi-mode mobile


The Kenwood TS-450S is a formidable transceiver covering 160 through 10 meters including the WARC bands with 100 watts input.


Very nice power supply. Robust design and a good performer. It has the 6 pin output cord plug and a rear terminal strip for accessories or other transceivers not using the molex connector. 20A.


The Kenwood SP-820 matches the R-820 and TS-820S. The SP-820 has selectable tone filters to attenuate high and/or low frequencies. Plus you can select between two audio input sources. The ¼ inch headphone jack on the front panel is post-filtration. It features a 4.75 inch 8 ohm speaker. Frequency response is 100 to 5000 Hz. The rear panel has three RCA phono jacks for: Inputs A and B and Line Output. 6.25 x 6 x 13.4 inches.


Eurpoean version of TH-79A


Small speaker mike


If your aritcles are always this helpful, "I'll be back."

Kenwood TH-D72A

The Kenwood TH-D72A Data Communicator is equipped with a built-in TNC (1200/9600) and provides APRS® (Automatic Packet/Position Reporting System) and there is an integrated GPS! And the TH-D72A can employed as part of Kenwood’s Skycommand System II+ when used with the TS-2000 series. The TH-D72A also offers EchoLink® memory compatibility and a mini-USB connector for enhanced computer connectivity. Features include: 1000 alpha memory channels, 9 scan modes (VFO, Program, MHz, Memory, Memory Group, Call, Tone, CTCSS, DCS), 42 CTCSS frequencies, 104 DCS (Digital Code Squelch) codes, Cross-tone, Waypoint export, DX cluster tune, Clock (date/time), Band mask, Call channel, Monitor, Auto power-off, MHz mode, Selectable frequency step, Shift, VOX, Auto repeater offset, Automatic simplex checker, and DTMF memory (10 channels, 16 digits). New advanced innovations include:1200/9600 bps packet TNC,SkyCommand APRS Firmware, Stand-alone Digipeater, Built-in High performance GPS (with KML file support from the free MCP-4A software), GPS logging – memory for up to 5000 points of track data, EchoLink Ready, MIL-STD810 and IP54 weatherproofing, 1200/9600 bps packet communications, Kiss mode, Stand-alone Digipeater and the TH-D72A can even function as an iGate when properly connected! This transceiver is sure to make ham radio operations easier and more fun for all.

Kenwood TS-590S

HF-50Mhz All mode transceiver The TS-590S marks a bold new chapter in Kenwood's proud history of manufacturing high-performance transceivers. Featuring a narrow-band Roofing Filter the TS-590S significantly reduces interference from unwanted signals that would be hidden to lesser rigs. With IF AGC based on advanced DSP technology, Kenwood has essentially redefined HF performance. Built to satisfy the most demanding DX'er, this high-performance HF transceiver takes Amateur Radio to the next level continuing the Kenwood tradition of operating ease and rugged reliability. General Features • Best dynamic range in its class versus off-frequency interference • 500 Hz / 2.7 kHz Roofing Filters • 32-bit floating point DSP • 100 W heavy-duty design • Built-in automatic antenna tuner ( 6 ~ 160 meters ) • USB & Serial DB-9 ports for PC connectivity • Kenwood ARCP-590 Control Software • Kenwood ARHP-590 Radio Host Program for VOIP • CW Auto Tune • Beat Cancel


2m FM Transceiver


big, bulky, heavy, works


Handheld TRX 2m/70cm Wideband RX 0.1-1300MHz AM/FM/N-FM/SSB Rugged according to MIL-STD 810 C/D/E TNC connectable

Kenwood TS-820S

HF rig 10m-160m, tube radio.


Kenwood TS-2000 HF, 2 meter, 70 CM, 23CM, all mode


Wow, this is in every respect what I ndeeed to know.


160m to 10M HF radio, all modes.


160m to 10m all mode transceiver


High RF power output The TM-261A and TM-461A put out an impressive 50 watts and 35 watts, respectively. Both models also have mid- and low-power settings. Meets MIL-STD requirements Strict MIL-STD environmental standards for vibration (MIL-STD 810C) and physical shock (MIL-STD 810D) are fully complied with. 61 multi-function memory channels plus 1 call channel For quick access, essential data -- transmit and receive frequencies, frequency step, tone frequency, etc. -- can be stored in the 62 memory channels. All channels can store transmit and receive frequencies independently for odd split repeaters. Memory Name (MN) function All 62 channels can be identified alphanumerically (max. 6 characters) instead of by frequency. This is particularly convenient for repeaters and club channels. It is also possible to switch to a channel number display. DTSS selective calling Built-in DTSS (Dual-Tone Squelch System) allows DTMF access: the squelch is opened only when a specific 3-digit code has been received. Using the wildcard asterisk, group calling is also possible. Multi-scan capability Choose from several scan modes: full band scan, programmable band scan, and memory scan with programmable memory channel lock-out. There are also 2 scan stop modes: TO (time-operated) and CO (carrier-operated). Dual menu system Two menu modes -- A and B -- offer full control over such settings as frequency step and the time-out timer, when required. DTMF memory function Up to ten 15-digit DTMF codes with ID can be stored for auto-dial and autopatch use. Redial is also provided. Built-in CTCSS tone encoder and optional decoder The optional decoder enables the setting of different tones for transmit and receive. Optional backlit DTMF microphone (supplied with some versions) This multi-function microphone has backlit keys to facilitate operation in low-light situations. Other Features: Tone scan Wireless cloning function Auto repeater offset (TM-261A) Repeater reverse switch Lock function Busy channel lockout Auto power-off Time-out timer



The control head is detached and comes with remote cable for easy installation. The TM-VD710A is a true dual-band operation radio so VHF+VHF/VHF+UHF/UHF+UHF operation is possible. General Features • High RF Power Output (50W) • 1,000 Multifunction Memory Channels • Dual Receive on Same Band (VxV, UxU) • EchoLink® MEMORY (Automatic Dialer) • EchoLink® Sysop Mode For Node Terminal Operation • Multiple Scan • Invertible Front Panel • Choice of 2 Backlight Colors (AMBER/GREEN) For The LCD Panel • 104-Code Digital Code Squelch • "FIVE-IN-ONE" Programmable Memory

Kenwood TH-G71

144/430 MHz Dualband FM handheld transceiver