Listing Icom Products

← Back to companies


1200MHz Digital Transceiver


Enter the world of Digital Radio with the ICOM ID-800H 2M/440 dual bander. It features D-STAR Digital Voice Capability and supports 20 character short text messaging with on screen display. The ID-800H can transmit and receive D-STAR format digital voice and 950 bps data communication, simultaneously. The Digital features of the ID-800H are compatible with 2200H, V82 and U82 radios with the optional UT-118 installed. In addition, analog FM mode is also available. You get: detachable control panel, wideband receive, three power settings, built-in CTCSS decode/encode, PC compatibility and 500 alpha memory channels. Power output is 55/15/5 watts on 2 meters and 50/15/5 watts on 440 MHz. The ID-800H wideband receiver covers 118-173, 230-549 and 810-999 MHz (less cellular). The ID-800H includes a built-in duplexer, OPC-600/R separation cable, HM-133 remote hand mic, mobile mounting bracket, power cord and spare fuses. This model requires 13.8 VDC at 12 amps. The ID-800H is built tough to meet stringent U.S. Military Specifications.


Enter the world of Digital Radio with the ICOM ID-880H 2M/440 dual band mobile. Output power may be selected at 50, 15 or 5 watts. The receive range (USA version) is: 118-173.995, 230-549.995, 810-823.990, 849-868.990 and 894-999.990 MHz. Supported modes include: FM, AM (receive only) and DV. You get 1052 memory channels in 26 banks, with 8 character channel names. CTCSS/DTCS tone encode/decode is standard. Weather receive with weather alert is supported. This radio comes with the HM-133 DTMF mic, separation cable, mobile mounting bracket, remote head bracket, mic hanger, DC power cord and spare fuses. This radio requires 13.8 VDC 12.5 amps. Free CS/80/880 programming software is available from the Icom website.


The Icom IC-V8000 is a powerhouse. This 2 meter FM mobile features high power output coupled with a rugged die-cast design and an easy-to-read alphanumeric display. You can even change the display from amber to green. The transmitter delivers a big 75 watts of output (75/25/10/5 watts selectable). You will be kept informed of weather emergencies with the Weather Alert and Weather Channel Scan features [USA version only]. The fully customizable memory system is awesome. A total of 207 channels (in ten banks) are supported (including 1 call channel and 6 scan edge channels). Each memory is alphanumeric and stores a 6 character name, tone frequency, skip info and more! The V8000 supports three types of scanning. The supplied HM-133V remote control mic controls everything in the palm of your hand. ICOM's exclusive Hot Keys lets you program the features that you use the most. The bigger backlit keys allow you to operate in low light conditions. This radio is supplied with: HM-133V remote hand mic, OPC-1132 DC power cable, V8000 MMB mobile mounting bracket, spare fuses and mic clip.


The ICOM IC-2820H 2M/440 dual bander has all the features you would expect and some you would not! You get: separate front panel, wideband receive, 3 power settings, built-in CTCSS decode/encode, selectable amber/green display, PC compatibility and 522 memory channels. V/V and U/U receive is available. The rear panel has two SO-239 antenna jacks to support diversity reception (two antennas required). The diversity function compares the receiving signal strength from two different antennas, ANT1 and ANT2, and automatically selects the strongest signal. This feature is useful when you are listening in a moving vehicle or the transmitting station itself is moving. The band scope function lets you watch conditions near the receiving frequency. Diversity receiving, for improved signal stability is available in 127 MHz, 136 MHz, 146 MHz, 375 MHz, 440 MHz and 500 MHz bands only (two antennas required). The IC-2820H is D-STAR upgradable with the optional UT-123 Power output is 50/15/5 watts on 2 meters and 50/15/5 watts on 440 MHz. It is 9600 BPS packet ready too (6 pin DIN). This radio comes with full function backlit HM-133 remote DTMF hand mic, mounting bracket, power cord and spare fuses. Please note that the mic plugs into the body (not the head). Main unit size: 5.9 x 1.65 x 7.4 inches 3.3 Lbs (150x40x188mm 1.5 kg). Controller size: 5.9 x 2.6 x 1.25 inches 7.4 ounces (150x58x32mm 210g). This model requires 13.8 VDC at 12 amps. This radio is supplied with both the OPC-1663 (11 foot) and OPC-1712 (3.9 inch) head separation cables. This radio is reviewed in the November, 2007 issue of QST.


The Icom IC-92AD is a rugged 5 watt dualband HT with D-STAR built-in! Three RF power levels are available. It is built military tough. The IC-92AD (and optional HM-175GPS) have superior waterproof protection and is equivalent to IPX7 (1 meter underwater for 30 minutes). The aluminum diecast chassis and gasketsealed housing provide performance you can count on in harsh outdoor environments. Icom’s original wideband PA circuit and supplied lithium-ion battery pack provides 5 watts (typical) output power on both VHF and UHF bands. The supplied BP-256 provides up to 6/5.5 hours of operating time (Stand-by duty ratio= 1:1:8). When you do not need full power operation, you can reduce output power to 2.5/0.5/0.1 watts to conserve battery consumption. The 92AD features a multi-line, full dot-matrix display with simple bandscope. With this backlit display you cand see the alphanumeric channel name, bandscope, received message and position information, etc. You can even change the display setting to show frequency or memory name in the center of the display. The four cursor direction buttons on the keypad give you quick and intuitive access to many settings. The dual volume/channel knob provides convenient channel selection and volume control. And of course you have keypad entry. The built-in voice recorder (in DV mode only) records an incoming call for up to 30-seconds (or 15 sec. × 2 tracks, 10 sec. × 3 tracks). For automated outgoing calls, you can pre-record up to 10 seconds of your callsign and/or CQ message in the IC-92AD’s voice memory. The VFO-A receive range is 0.495-823.990, 849-868.990 and 894-999.990 MHz. The VFO-B receive range is 118-174 and 350-470 MHz. You get dualwatch receiver capability, allowing you to receive on two bands simultaneously (including the same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a single press toggles the active VFO channels (A band/B band) (some frequency restrictions apply). Used with the GPS speaker-microphone, HM-175GPS, the IC-92AD shows your position data on the display and offers automatic position reporting in DV mode. The IC-92AD shows the direction to a received D-STAR station or to a memory stored with a compass-like display pointer. In addition, the GPS-A mode assists in easy D-PRS system operation. This abililty to transmit position data is perfect for search and rescue. Other features include: 1304 memory channels,, external DC power jack (10–16VDC), 10 channel DTMF memory (16-digit), Squelch disable function to monitor a weak signal, Built-in CTCSS/DTCS tone encoder and decoder (FM mode), Auto power save, power off and power on, 26 memory banks with selected bank and bank link scanning and 10dB attenuator. The IC-92AD comes with BP-256 Lithium Ion Battery, MB-111 belt clip, flexible SMA antenna, wrist strap and BC-167A wall charger.


The Icom IC-80AD is a rugged dualband 2 meter/440 HT with D-STAR built-in! Power output is up to 5 watts on each band. Four power levels are available: 5, 2.5, 0.5 or 0.1 watts. The controls are easy to use. Multiple scanning modes are supported. You get 1052 memory channels in 26 banks, with 8 character channel names. CTCSS/DTCS tone encode/decode is standard. Weather receive with weather alert is supported. A large, informative back-lit display is featured. This radio comes with SMA antenna, MB-107 belt clip, BP-217 lithium ion battery, BC-167A charger and wrist strap. Free CS/80/880 programming software is available from the Icom website.

Icom IC-7700

Great HF 200 watt transceiver! Blew away my old IC-756 proII.


[DISCONTINUED] The Icom W32A dual bander has impressive alphanumeric and memory display. Independent tuning knobs and backlit display and keypad are also featured. The transceiver's two dials are used for independent tuning of the VHF and UHF band. This conveniently allows independent adjustment of either band. With ICOM's exchange function you can assign VHF/UHF tuning and volume to either knob as you prefer. And of course the frequency display will sync with this function. Independent main and sub bands allow you to receive both VHF and UHF simultaneously; or use the V/V and U/U functions for receiving two frequencies on the same band. Moreover, either operating band can be used in transmit regardless of whether it appears in the proper display or not. Full crossband duplex is supported. You get 100 channels for each band (200 total). Each channel can be assigned a name of up to 8 alpha characters from the keypad for easy recognition. Alpha tagging is also available for DTMF memory channels. You also get programmed, full and memory skip scanning. Other features include: impressive audio, 50 frequency PL encode, decode, backlit LCD, auto power off and two power levels.

IC-706 Mark IIG

Small enough for a mobile rig yet as powerful enough to be a base station.

Icom 746

Great base station with many features. Great prices on this piece of equipment can be found on e-bay. An oldie but goodie.

ICOM 7000

Transceiver, mobile, HF through 440MHz


The Icom IC-2100H 25N 2 meter FM mobile features a rugged design and an easy-to-read alphanumeric display. The displays may be set to green or amber. The receiver covers 136-174 MHz and the transmitter delivers 55, 10 or 5 watts of output. The improved receive IMD helps provide protection from excessively strong signals such as pager signals. And the squelch attenuator (approx 10 dB) allows you to reduce interference from strong nearby signals. A winning combination for receive performance. The oversized tuning dial is easy to grab while on the move and the large 4-level backlit display clearly provides key information at a glance. Memory channels can be assigned names for easy recognition and easy access.


The commercial grade IC-T90A transceiver offers a wideband AM, FM, and WFM scanning receiver. Not only you can hear your favorite TV programs with the pre-programmed TV memories, but also you can listen to shortwave, AM and FM broadcast radio stations with good sound quality. Fire, aircraft and various amateur bands also can be tuned.


While the IC-V85 provides a full 7 watts of output power, its 110mm body height is compact enough to allow for easy carrying. Let the power of 7 watts extend your communications range. With its large capacity Lithium-Ion battery pack, BP-227, the IC-V85/E provides a practical 7 hours of operating time. Reduced power (4W/0.5W) settings are also available for even longer operating time. An external DC power jack allows for operation when used with the external DC power supply (11.0V DC). Your IC-V85/E receives and transmits as it charges. The water resistant construction, equivalent to IPX4 rating, provides reliable operation in wet conditions for practical outdoor usage. Up to 107 memory channels can be stored. Use the 5-character display capabilities to assign your own individual channel names, then store those channels in any of the 10 memory banks. The DMS (Dynamic Memory Scan) system allows you to scan selected memory banks by simply adding and deleting bank links. Other features: ?Weather channel receive with weather alert ?Automatic repeater function* ?Reversible control knob and up/down button assignment ?PC cloning capability


2m Mobile with up to 50w transmit power. Fanless heat sink, inline fuse, and UHF connector pigtail on the back.


Stable 65W* Output and New Digital Features


IC-P7A VHF/UHF Dual Band FM Transceiver




The IC-718 has 0.03-29.999999 MHz* general coverage receive capability. A 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially from in-band near-by interfering signals. A well-designed double-conversion system to help minimize image and spurious responses for better signal fidelity, is also built-in. A newly designed PLL circuit has been adopted to improve C/N ratio characteristics. The combination of the 4-element system mixer and new PLL circuit allows superior basic performance as that of a commercial grade transceiver.


The ICOM 756 Pro III is the latest member of the venerable "756" family that started with the 756, 756 Pro, 756 ProII. This latest version offers some incremental improvements over the previous 756 Pro II:

ICOM IC-756 Pro

This is the original ICOM IC-756 Pro HF Radio. 160m - 6M. AM/FM/SSB/CW/RTTY 5-100/5-100 W (AM: 5-40 W)

Icom IC-271A

2 Meter all mode base transceiver. 25 watts pep.

Icom IC-27A

1980's vintage 2m moble rig. Pretty basic rig, but still chugging in 2009!

Icom IC-735

The ICOM IC-735 is an ultra-compact, easy to use HF radio covering 160 through 10 meters with 100 watts. Modes include SSB, CW, FM and AM. Enhancements include: dual digital VFOs, 12 memories, full QSK, RIT, speech compressor, and noise blanker. The 735 has a general coverage receiver covering 100 kHz to 30 MHz with 105dB dynamic range. The advanced, triple conversion receiver section includes pass band tuning, notch, preamp and attenuator. A translucent cover protects the slide controls that adjust: NB Level, RF Gain, RF Power, VOX Gain, VOX Delay and speed for optional keyer. Requires 13.8 VDC at 20 amps. Only 9.5 x 3.7 x 9.4 inches 11 lbs. (241x94x239mm 5kg). Features All Mode Analog S/RF Meter RIT VOX Function IF Notch 100 Hz LCD Display Dual Digital VFOs Optional Keyer 12 Memories Scanning General Coverage Receive PBT Noise Blanker Preamp


The ICOM PCR1000-02 wideband computer receiver connects externally to your PC. This provides compatibility with many computer models, even laptops. Incredible coverage is yours with reception from 10 kHz to 1300 MHz (less cellular). Modes of reception (and bandwidth) include AM (15/6 kHz), FM-Wide (230 kHz), FM-Narrow (15/6 kHz), SSB (2.8 kHz) and CW (2.8 kHz). A triple conversion circuit ensures good performance over the entire range. Shortwave sensitivity (1.8-28 MHz) is an impressive 0.28µV.

Icom SP-23 Speaker

The Icom SP-23 speaker matches many Icom receivers and transceivers. It is 8 ohms and is rated at 2 watts [4 watts maximum]. The SP-23 with four separate audio network filters [HPF1 500 Hz, HPF2 250 Hz, LPF1 3000 Hz, LPF2 1000 Hz]. This allows you to tailor the frequency response of the speaker. Input A or B may be selected so two radios may share this speaker. There are two 3.5mm mono audio input jacks on the back panel. There is a speaker on-off switch and a 1/4 headphone jack on the front panel. Metal construction 5.75 x 4.25 x 11.2 inches 3.6 lbs. (145x111x283mm 1.65 kg). The bottom panel of the speaker features a pull-out tilt stand if you wish to angle the speaker. A single audio cable is supplied with a mono mini plug at both ends.


160 thru 10 HF rig


The ICOM HM-175GPS speaker-microphone is an exciting accessory for your IC-92AD. It is submersible to IPX7 equivalent standard and features an integrated GPS receiver. The cold start TTFF (time to first fix) is 40 seconds and a hot start is 4 seconds (typical). The required 5 VDC at 65 ma is supplied from the HT. The built in 8 ohm speaker is rated at 1 watt (5% distortion)

Icom 1200A

23cm mobile fm rig

Icom 402s

70cm ssb/cw portable radio

Icom IC-7800

Full feature low band radio 160m - 6m.

Icom IC-1275A 1200 MHz radio

1200 MHz radio. All modes.

IC-375A 220MHz Radio

All mode 220 radio.

Icom IC-R8500

Wide band receiver 0.1 - 2000 MHz.


The ICOM IC-7200 is a robustly built amateur transceiver providing coverage of HF amateur bands plus 6 meters. Power is 100 watts. Features include easy-to-use controls, DSP filtering with 51 passband widths, digital twin passband tuning, manual notch filter, keypad entry, dual VFOs, large display, voice synthesizer, 201 memories, 20 dB attenuator, preamp, 6 kHz roofing filter, RIT, scanning, 1 Hz step tuning and more! The excellent general coverage receiver tunes from 30 kHz to 60 MHz. The meter displays Power/SWR/ALC. Power is 2 to 100 watts (40W AM). Although the IC-7200 is not waterproof, extra design steps have been applied to the front panel buttons and knobs. This provides a measure of protection against water intrusion. There is even a USB port on the rear panel! This radio comes with an HM-36 hand mic, OPC-1457 DC power cord and spare fuses.


Amateur HF transceiver Frequency range: 10-80 m + WARC Mode: SSB/CW/AM RF Power output: 100 W Voltage: 13.8 VDC


Automatic antenna coupler for random-length wirers, covers 3.5-54 MHz @ 120 watts maximum.

Icom IC-725

CW/SSB HF 160-10M transciver w/ AM/FM option


The ICOM IC-751A is an advanced transceiver covering 160 to 10 meters. It features a high performance 100 kHz to 30 MHz general coverage receiver built in. Output is 10 to 100 watts SSB/CW/RTTY/FM modes (10 to 40 watts AM). The 751A has sophisticated capabilities such as: dual digital VFOs, all-mode squelch, Notch, Passband Tuning, RIT/XIT and attenuator. You also get 32 memories. The two color flourescent digital display is easy to read. Serious CW operators will appreciate the built-in electronic keyer, standard FL-32A 500 Hz CW filter, sidetone, plus full and semi break-in capability. The rear panel has an SO-239 antenna jack plus a receive only RCA phono jack. This radio requires 13.8 VDC at 20 amps. 12 x 4.5 x 14 inches (306x115x355 mm). This radio comes with the HM-12 hand mic.


Amateur VHF/UHF transceiver Frequency range: TX: 144-148 / 420-450 MHz RX: 136-174 / 400-470 MHz


The ICOM IC-207H 2M/440 dual bander is priced like a single bander, but it still has all the features you want. You get: detachable front panel, wideband receive, 4 power settings, built-in CTCSS decode/encode, PC compatibility and 182 memory channels. Power output is 50/20/10/5 watts on 2 meters and 35/20/10/5 watts on 440 MHz. It is 9600 BPS packet ready too (6 pin DIN). The IC-207H also includes a built-in duplexer, HM-98 hand mic, mobile mounting bracket and spare fuses. Size: 5.5 x 1.65 x 7.4 inches 2.6 Lbs (140x40x187 mm 1.17 kg). This model requires 13.8 VDC at 12 amps.

Icom 2710H

The Icom IC-2710H is a mobile FM transceiver for 2 meters and 440 MHz. The front panel is detachable from the main body, independent controls and switches are provided for each band and the multi-function microphone provides full access to all of the transceiver's functions. Memory includes: 200 regular channels, 2 call channels, 12 scan edges and 6 scratchpads


Frequency coverage (Unit: MHz) VHF Tx: 144-148; Rx: 118-174 *1 UHF Rx/Tx: 430-450 *2 Guaranteed 440-450 Mode: FM, AM (RX only; 118-135.995 MHz) Number of memory channels: 232 (inc. 12 scan edges, 10 log, 10 repeater and 2 call) Tuning steps: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz Frequency stability: ±10 ppm (-10°C to +60°C; ) Power Supply Requirement : 13.8 V DC ±15% (negative ground) Current drain (VHF/UHF; at 13.8 V DC) Transmit Max Power 12.0A / 11.0A Receive Standby 1.2 A Receive Max Audio 1.8 A Antenna connector :SO-239 (50) DATA Connector: Mini DIN 6-pin External VIDEO Input: PHONO [RCA (75)] Dimensions (projections not included): Controller 140(W) x 70(H) x 34(D) mm; 5-1/2(W) x 2-3/4(H) x 1-11/32(D) in Main Unit 140(W) x 40(H) x 165.8(D) mm; 5-1/2(W) x 1-9/16(H) x 6-17/32(D) in Weight (approximate): Controller 290 g; 10.2 oz Main Unit 1.15 kg; 2 lb, 9 oz

Icom IC-2720H

Icom IC-2720H Twice the Versatility, Twice the fun!?? 2m/70cm FM transceiver plus wideband receive. Wideband receiver covering from 118MHz - 999MHz FM & AM


A HF/50MHz rig from the '90s


Nice, basic dual-band mobile with high power. Great for ARES/RACES use.


2 meter all mode


Freq Range 10-160m: Mode SSB/CW/RTTY: RF PWR 100W Retro Red LED Display. Not a lot of bells and whistles.


160M-10M Radio w/ built-in general coverage receiver


VHF FM Transceiver (2m only) 10 memories


2m SSB/CW/FM mobile multimode


3W 144MHz SSB/CW portable transceiver.


The Icom IC-T2H is a single band, easy to use, 2 meter H.T. designed for everyone's budget. Innovative features such as cloning capability and a guide function are housed in a no-nonsense solid body. Tone squelch operation (encode and decode) is standard for quiet standby. Pocket beep provides a method of keeping track of calls even when you are away from the transceiver. Tone scan allows you to detect subaudible tone frequencies such as those used to open a repeater. Eight front panel keys may be customized allowing you to assign their function to your operating style. This U.S.A. version even receives ten weather channels. Five DTMF memory channels store up to 32 digits each. A full 6 watts of power will hit those distant repeaters. Includes BP-194 battery case, eight AA NiCads, BC-110A wall charger and BNC flexible antenna. Only 2.3 x 5.6 x 1.3 inches 14.8 oz (58x141x33 mm 420 g).


Base station or mobile 2m rig outputting 1-10w


HF VHF base station - this is the IC-746Pro in the US

SP-21 External Speaker

External speaker matching the IC-7400


Icom Electret desk mike


Icom 25A power supply


Icom antenna tuner


Icom dual band mobile transceiver 1991-19XX


Dual Band FM Transceiever


2m Handi Talkie


2m/440 HT


A 2 meter handheld that combines quality and economy. Receive range is 138-174 MHz. Tuning steps include: 5, 10, 15, 20 or 25 Khz. Features include battery saver, 20 memories, program and memory scan, and DTMF keyboard. Power output is selectable at 7 or 1 watts. Includes BP-70 NiCad battery, BNC flexible antenna and charger. 2.6 x 5.9 x 1.4 inches.


The original Icom 706 HF/6m/2m all mode radio .

Icom IC-80AD

Switchable VHF/UHF dual bander The IC-80AD provides VHF/UHF dual band capabilities (one band at a time) via a simple band switching system.


Icom proudly announces the debut of a new 5W, UHF digital transceiver, ID-31A. The ID-31A/E has a look and feel along with a new user interface packed into slim, compact chassis protected with IPX7 submersible construction. The built-in GPS receiver shows your current position and altitude for GPS position reporting function and the GPS log function tracks your movement. The ID-31A has a micro SD card slot which can be used for storing GPS log, voice memory and memory contents. The large full dot-matrix display, directional keypad and quick menu button also ease the usability. Accessing D-STAR (Digital Smart Technology for Amateur Radio) repeater has been made even easier.


HF all mode transceiver 160M to 6M


Icom VHF mobile Radio


The Icom IC-V82 provides a beefy 7 watts of output power for superior transmit range. All this power is available with the supplied battery pack (V82-25 version). Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time. Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom’s exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links. Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency. 50 CTCSS and 104×2 DTCS tone squelch operation codes (encode and decode) provide quiet standby and allow you repeater access. A pocket beep alerts you of a call and a tone scan can detect the sub-audible tone in use in the receiving signals. Five DTMF memory channels with up to 24 DTMF codes allow remote operation. The optional UT-108 DTMF decoder unit provides code squelch operation as well as a pager function. The V82 has a large LCD display and easy to use controls The optional UT-118 provides D-STAR format digital voice and slow data communication. With the UT-118 in the digital mode; your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory. When connected to an external GPS receiver [NMEA 0183 output and RS-232C interface are required], position information can be exchanged with other stations. When the receiving side is connected to a PC, position monitoring is possible [Position mapping software required {Not supplied or available from Icom}]. Other standard features include: NOAA weather receive, automatic repeater function, reversible control knob and up/down buttons assignment. All this with simple operation and durable construction.


DISCONTINUED Marine SSB Rig also used in Amateur Radio Covers all allowed bands between 1.6 and 27.5 MHz General coverage receiver Modes: SSB, RTTY, CW and AM 2182 kHz alarm built-in (optional for General versions) RF gain control Audio activated squelch Terminals for frequency/mode control via NMEA interfacing Direct keypad channel selection entry Large, front-mounted speaker Direct keypad channel selection entry Weather fax ready Backlight control CW full break-in and semi break-in


The Icom IC-756 covers all nine HF ham bands plus 6 meters (receive from 30 kHz - 60 MHz). The high resolution 4.9 inch monochromatic TFT dot matrix LCD display provides more operating information than you've ever had before, including a spectrum scope function. The Icom 756 is shown above with the optional PS-85 power supply and optional SP-21 external speaker. The 756 requires 13.8 VDC at 20 amps. 13.375 x 4.375 x 11.25 inches 23.1 Lbs. (340x111x285mm 10.5 kg)


The Icom IC-7600 provides professional performance in the 160 to 6 meter amateur bands. It utilizes Icom's proven IF-DSP technology and features selectable roofing filters at 3kHz, 6kHz and 15kHz. Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio other for the spectrum scope. 104dB dynamic range and +30dbm 3rd order intercept point is achieved on the HF bands. It utilizes a double superhet with an image-rejection 2nd mixer circuit providing improved in-band IMD. The 5.8 inch (diagonal) color WQVGA display has a quick-start LED backlight and views well from any angle and you can even program your startup screen. Dual frequency watch is available with same band operation. There is even a RTTY and PSK31 encoder/decoder built-in! The IC-7600 has all the features you would expect are here including PBT, RIT, XIT, keypad, 24 hour clock-timer, 101 memories and multiple scan modes. There is also a built-in voice recorder and voice synthesizer (English/Japanese selectable]. This radio has two USB ports. The front panel USB port is for keyboard or memory drive (not supplied) and one on the rear panel for PC control and audio. This radio has a six transmit meter functions and three meter display modes. Plus a meter output jack on the rear panel. Enjoy great stability with a built-in TCXO providing 0.5ppm (0 - 50°C). There is both a mechanical relay (16V/0.5A) and FET relay (250V/200mA) for keying external amplifier. Separate RX-OUT and RX-IN antenna ports are provided allowing connection of external preselectors, multicouplers etc. There is also a transverter port. This radio requires 13.8 VDC at 23 amps.


The IC-9100 contains years of advanced Icom technology in a compact, all-in-one HF/VHF/UHF transceiver. This radio covers most ham bands and modes, and provides a wide variety of operating styles. Whether you're working DX QSO, RTTY, D-STAR DV, satellite or even moonbounce, Icom's years of technological experience is working right along with you.


The Icom IC-703 Plus all-mode transceiver delivers efficient QRP operation on HF (160-10 meters) and 6 meters. Output can be set for 10, 5, 2.5, 1 or 0.5 watts. Energy conservation is realized by lowering the power source voltage and this rig draws only 300 ma in Standby mode, not 2 amps like some other radios. Many features, usually extra charge, are built-in including: automatic antenna tuner, AF DSP, memory keyer and TCXO (± 0.5 ppm). A large high contrast, backlit LCD keeps you informed. An easy-to-use menu system allows you to tailor many aspects of the radio's operation to your preferences. Other features include IF shift, AF speech compressor, spectrum scope, and SWR analyzer. Four types of scanning are supported. Includes: OPC-1229 DC power cable, spare fuses, key plugs, acc cable and HM-103 hand mic.


The IC-7100 has not been approved by the Federal Communications Commission. This device may not be sold or leased, or be offered for sale or lease, until approval of the FCC has been obtained. In 1995, almost two decades ago, Icom has changed the way hams think about mobile HF communication with their introduction of the IC-706. Since that time, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. Now, at the 2012 Tokyo Hamfair, Icom has once again changed mobile HF communications with the introduction of the IC-7100.


The IC-91A has dualwatch receiver capability, allowing you to receive* two bands simultaneously (including same band). By pushing and holding the [Main/Dual] button, you can easily turn dualwatch on and off, while a press of the button allows you to toggle the active VFO channels.


The Icom ID-51A may be the most hi-tech dual band HT in the world. It covers 2 meters and 440 MHz and receives two bands simultaneously (V/V, U/U & V/U). It is IPX7 waterproof and features a built-in GPS! The 128x104 dot-matrix display is impressive. This radio has an astounding 1304 channel alphanumeric memory system. There is a Micro SD card slot for an optional memory card. This can be used to store DVR Incoming/Outgoing Messages, GPS Log and Memory Backup. There is built-in CTCSS/DTCS encode/decode for analog FM. It even features an independent AM and FM broadcast receiver. A new Voice Memory feature records incoming and outgoing calls and can be used as a voice recorder. The USA version includes the BP-271 battery, SMA flexible antenna, CS-51 Programming Software (requires OPC-2218LU cable sold separately), MB-127 belt clip, strap and BC-167SA wall charger. 2.3 x 4.2 x 1.1 inches 9 oz. Our current stock is all (S/N >5001400).